What preparations need to be made before using
by：Easy Touch
2020-09-23
With the improvement of people's quality of life, vending machines, as a convenient and fast new retail automatic sales service model, have become an indispensable existence in the daily life of the masses. So, do the comrades who operate the vending machine know what preparations should be made for operation after receiving the machine? Ji Mei briefly introduces the following points:
1. After the vending machine is received, first check whether the packaging is intact. If it is damaged, please consult with logistics and call me
Division.
2. Please remove all packaging components such as wooden boards, protective films, foams, and cable ties before use.
3. Place the machine at the location where you are operating, requiring dryness, good ventilation, away from heat sources, and avoiding rain
Sprinkle, avoid low temperature, avoid water splash, firm and stable ground, more than 20cm away from wall.
4. After the machine is set up, let the machine stand for more than 30 minutes before turning on the power to ensure the normal operation of the machine. If you want to turn on the refrigeration, the machine needs to stand for more than 45 hours to turn on, otherwise it will affect the compressor.
The machine has a room temperature power of 60W, a maximum cooling power of 510W, and a maximum heating power of 760W. The cooling and heating are optional.
There is also a very important point. Ji Mei reminds everyone that the power supply of the vending machine must be grounded! Ungrounded machines cannot be used, otherwise there will be serious safety hazards.
1. After the vending machine is received, first check whether the packaging is intact. If it is damaged, please consult with logistics and call me
Division.
2. Please remove all packaging components such as wooden boards, protective films, foams, and cable ties before use.
3. Place the machine at the location where you are operating, requiring dryness, good ventilation, away from heat sources, and avoiding rain
Sprinkle, avoid low temperature, avoid water splash, firm and stable ground, more than 20cm away from wall.
4. After the machine is set up, let the machine stand for more than 30 minutes before turning on the power to ensure the normal operation of the machine. If you want to turn on the refrigeration, the machine needs to stand for more than 45 hours to turn on, otherwise it will affect the compressor.
The machine has a room temperature power of 60W, a maximum cooling power of 510W, and a maximum heating power of 760W. The cooling and heating are optional.
There is also a very important point. Ji Mei reminds everyone that the power supply of the vending machine must be grounded! Ungrounded machines cannot be used, otherwise there will be serious safety hazards.
Custom message
