Qingdao vending machine is maintained daily by Yu Wei

by:Easy Touch     2020-08-27
In order to make the vending machine work better, reduce the occurrence of failures, and increase the service life of the vending machine, the vending machine operator is required to do the following maintenance work:

First of all: for safety, please unplug the power plug before the machine is maintained.

1. Keep the machine clean
Outside the vending machine: When there is dust on the outside of the machine, wipe it with a dry cloth. If there is too much dust and cannot be wiped off, use warm water or water to dilute and neutralize to clean, and then use a cloth dipped in the diluted solution to clean the machine. Xiaomei reminds everyone that even if the dirt is difficult to remove, do not wipe the machine with solvents or alkaline liquids, otherwise the panel and selection buttons may crack.

Inside the vending machine: Use a soft towel or sponge dipped in warm water (neutral detergent can be added) to clean iron and plastic parts such as the fuselage, cargo tray, etc. When cleaning switches, display screens and other electrical parts, please use a dry cloth machine Please wipe off any water on the surface with a dry cloth.
Warning: Do not use stiff brushes, wire brushes, or organic solvents such as decontamination powder, gasoline, banana water, acetone, hot water, or acids or alkalis to clean the machine; do not spray with water during cleaning to avoid affecting electrical insulation performance.

2. Check whether the keys and the refund button are working properly;

3. Check whether the change coins/banknotes and goods are sufficient and timely replenish the change coins/banknotes and goods.

4. Regularly check whether the door locks, mechanical parts, and gears work smoothly,

5. Check whether the fasteners are loose, and tighten them in time if they are loose.

6. Ask a professional to remove the dust from the condenser every 3 months.

7. Regularly remove the dust on the back and bottom of the machine to improve the heat dissipation effect

8. Coin recognizer: Coins are easily stained during the circulation process. When the stained coin passes through the coin channel of the vending machine, it will stain the channel over time. If the dirt is too serious, it will cause the vending machine The performance of coin selection, change, and refund of coins is abnormal. Therefore, in order to maintain the good performance of the coin recognizer, the passage of the coin recognizer should be wiped at least once a month. Do not wipe with gauze moistened with hot water. Use a dry cloth or a slightly moistened cloth.
To live up to our responsibilities to serve and enhance the communities in which Qingdao Easy Touch Technology Co., Ltd. works and lives and the society on which we depend.
Qingdao Easy Touch Technology Co., Ltd. also values the time, skills, and expert opinions of our staff. We are committed to providing fair and living wages, reasonable, structured work schedules, and clear duties and spheres of rights and responsibilities for each team member.
Qingdao Easy Touch Technology Co., Ltd. deems vending machine manufacturer as evolutionary rather than revolutionary. We've always had these 'social commerce' marketplaces in some form.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...